3 Ways to Increase Your Wi-Fi Signal

Searching slowing to a crawl, the inability to stream, dropped Wi-Fi signals, cordless dead zones– each of these problems is maddening in a world where getting online has ended up being, for some, as required as breathing. Well, possibly not that critical, but crucial. If the only way you can get good reception is to be in the very same space as your wireless router, these simple ideas can help optimize your network.

Range is the most obvious problem– there is a specific optimum variation that the cordless signal can take a trip. If the network has to cover an area larger than the router is capable of transmitting to, or if there are lots of corners to walk around and walls to penetrate, performance will take a hit. Interference is likewise a big problem, specifically for those who live in largely populated areas. Signals from other wireless networks and electronic devices can impact speeds, as can physical blockages, such as walls. Numerous phone systems and other wireless gadgets can also hinder signals. This is a good thing to think about when you are looking for a brand-new phone system– a lot of them use DECT 6.0 nowadays, which coexists extremely nicely with standard Wi-Fi networks.

It’s also possible the issue isn’t interference or other networks. Is there a possibility you have undesirable guests piggybacking on your network? You can constantly take a look at your router’s administrator user interface to see the number of devices are connected. Or use a network analyzer tool to see if you have unidentified makers on your network. If it’s an open network, close it. Establish security– ideally WPA2, as WEP isn’t really as strong– and put in a strong password that’s difficult for others to think.

There are numerous other reasons why your connection might be less than ideal. Fortunately, we have some troubleshooting ideas to assist, and a lot of them will not cost you a penny.
1. Update Your Router’s Firmware
Perhaps your router just needs an update. Router manufacturers are constantly tweaking software to eke out a little bit more performance and speed. How simple– or how difficult– it is to update your firmware depends entirely on your gadget producer and design. Many current routers have the upgrade procedure constructed right into the administration interface, so it’s simply a matter of hitting a firmware upgrade button. Some models, particularly if they’re older, still require you to very first discover and download the firmware from the router manufacturer’s site. It bores, but still an advantage to do.

In fact, even if your cordless network isn’t ailing, you must just make it a point to update your firmware on a regular basis. You will get performance enhancements, much better features, and security updates that way. Here’s the best ways to access your router’s settings.

Move It, Move It
2. Optimum Router Placement
Not all rooms and spaces are produced equivalent. The reality is, where you position the router can impact your wireless coverage. It may appear sensible to have the router inside a cabinet and out of the way, or right by the window where the cable television is available in, but that’s not always the case. A wired router can be tucked away, out of sight, out of mind. A wireless router, on the other hand, needs open spaces, far from walls and blockages. It’s not simply physical blockages either; sturdy home appliances or electronics running in close distance can impact Wi-Fi performance.

If your router has external antennas, orient them vertically to bump up coverage. Elevate the router if you can. You can mount it on a wall, or put it on top of a rack or a table to get a better signal. There are lots of tools to help you picture your network protection. I personally like Heatmapper, or our Editors’ Choice, inSSIDer for Office, which shows you both the weak and strong areas in your Wi-Fi network. There are a lot of mobile apps, too, such as Netgear’s WiFi Analytics.
3. Exactly what’s Your Frequency?
Take a look at your network’s administrator user interface, and make certain you have it set up for optimal efficiency. If you have a dual-band router, you’ll likely get better throughput by switching to the 5GHz band instead of using the more typical 2.4 GHz band. If absolutely nothing else, you will likely experience less disturbance from other cordless networks and gadgets due to the fact that the 5GHz frequency is not as commonly used. Changing is quite easy. See if your router’s administrator interface provides 5GHz. If it does, enable it, and established the network as you would generally.

10 suggestions for improving your cordless router signal

When it pertains to “increasing” cordless speeds, there are actually 2 enhancements users generally look for: Range and speed. It’s great having a fast wireless network, but if you just get excellent speed when you utilize a wireless customer right beside the router and get no signal if you are 15 feet away, then speed doesn’t mean so much. You need to improve the signal’s range. If your device can hardly open buddies’ Facebook photos when you’re in the very same room as the router, then we’re discussing issues with speed.

In basic, speed and range issues can all be lumped together as performance concerns. You desire both your speed and range to be as robust as possible. There are several factors that can impact both elements of performance.

Distance can certainly restrain efficiency. You may have a room in your home or office that is just too far from your wireless router. Even the method your home or office is structured might be a culprit when it concerns bad cordless performance. If the signals have to bounce around too many corners to reach your wireless devices, that can trigger problems (although a technology in more recent premium routers called beamforming can assist direct a router’s signal to cordless clients).

Interference with the signal can be huge factor in efficiency, too. If you reside in an apartment building, your house may be swamped with signals from everyone else’s routers. Perhaps structural disturbance is the perpetrator. If your washering and dryer are between your router and your laptop, that doesn’t help.

Perhaps it’s the software you’re utilizing. Routers require software application updates just like everything else– and sometimes the firmware they initially deliver with is enhanced with a later-released update.

These are simply a few of the possible reasons your connection may be poor (or non-existent). Luckily, there are lots of ways to extend your cordless signal, and the majority of them merely include a bit of tweaking to your wireless network or including some affordable parts. In this article, we’ll walk you through 10 of the most helpful repairs for your connectivity issues.

A few of these suggestions need no additional hardware or software application to buy, while others might need a small or bigger financial investment, depending on the performance issue you’re experiencing. We’ll start off with complimentary solutions, then move through the cheap to more expensive enhancements.

1. Change the channel (free).

Not the TELEVISION’s channel, but your router’s. Wi-Fi routers operate on particular channels. When you established a typical router, it usually picks a certain channel by default. Some routers choose the least-crowded channel, however yours may not have. Look for yourself which Wi-Fi channel is the least crowded to increase the router’s efficiency, possibly improving signal variety. A good free tool to use is inSSIDer. Don’t resent the graphs and excess information. What you wish to focus on is the column “Channel.” See the number of routers in this location are on channel 6 in the image above? If your router is on the same channel, you wish to switch it to a less-crowded one, like 4 or 1. You can alter the channel of your router by going into its interface. All routers have different methods to access the user interface, so check with your maker on this score.

2. Update router firmware (totally free).

Upgrading router firmware is frequently neglected by home users. Business networking devices typically display some sort of notice when more recent software application for the gadget is readily available for download. Customer items such as home cordless routers, especially older routers, don’t constantly provide this notification. Check frequently for firmware updates for your router. There is typically an area in the router’s interface for upgrading the firmware. Nevertheless, you frequently need to go to the router manufacturer’s website and look for the firmware (most suppliers make searching for firmware pretty simple) and after that submit it through the router’s interface. There’s frequently accompanying release notes that tell you what the firmware helps to repair– and frequently the fixes are for connectivity issues.

3. Update adapter firmware (complimentary).

Similar to routers, network adapters on PCs and laptop computers are also subject to firmware updates. Keep in mind, excellent wireless variety and performance is dictated not simply by the router but by the network adapter on clients (in addition to other aspects, but these are the two biggies.) The majority of laptop computers have on-board adapters. Enter into your Network settings to find the name of the adapter (via the Control Panel in Windows) and after that to that adapter producer’s site to make sure you have the current firmware.

4. Modification position (free).

Do you have your cordless router situateded up against your broadband modem tucked away in your home entertainment centre in your basement that’s converted into the household den? Well, move it if you have range concerns. It isn’t really required to have the router in close distance to your modem. Ideally, a Wi-Fi router need to remain in a main area. You can purchase customized length Ethernet Feline 5 cable television from any computer shop (although if you do that, technically this is no longer a totally free option) if you require more versatility in centrally positioning the router.

5. DD-WRT (free).

This one is for the more daring: DD-WRT is open source software application for routers. It’s understood to increase router efficiency and extend the feature set beyond what normally includes most routers. Not every router supports it, however the variety of routers that are supported keeps growing. A word of caution, though– setting up DD-WRT might possibly invalidate your router’s service warranty. Numerous makers will not assist you repair router problems as soon as you have DD-WRT on them. Hence, this is not an advised choice for routers under service warranty or in a company network.

There are likewise no warranties that DD-WRT upgrades will not negatively impact a router. However, numerous users are discovering it a free method to trick-out their routers. So, if you have an older, extra router laying around, or want to start to see if DD-WRT firmware assists your range issues on a more recent router, check if it’s supported on the DD-WRT site. Likewise note that it’s difficult to get rid of DD-WRT from some routers without doing a lot research.

8 Tips To Efficiently Increase Your Wireless Router Signal

Look at it– staring you down so innocently, yet I know that your Linksys cordless chooses not to offer you signal. Given that you decided to position it in a corner to collect dust, using it just for its relay abilities, it has chosen to continuously bring up the feared “Restricted Network Connection” bubble. Do not you simply dislike those?

These routers have the power to transmit intangible signals; these signals, effective as they might be, are prone to consistent interference whether it be by physical objects, other signals floating around in the air, or perhaps since you didn’t plug the wire in all the method.

No matter exactly what the concern, there are some tested methods to attempt to fix the circumstance of a weak signal. Some may simply be a bit of common sense, other techniques need acquiring additional parts.

Here are 8 tips on ways to enhance your cordless router under 100 dollars signal.
Position it better

Unless you are living in a cave and you somehow astonishingly have web connectivity at the same time, you probably determined that if your cordless router remained in the corner of your kitchen area under a stack of old papers and your computer was located on the second flooring on the opposite side of your house– it is a terrific concept to put your router in an employment opportunity (preferably in the center of your house) where it isn’t really blocked by dense or metal items such as file cabinets or brick walls.

Other items that may disrupt your signal consist of (but are not limited to) microwave ovens, cordless phones, garage door openers, as well as infant displays. The bottom line is that the less items in the signal’s way, the easier it is for it to relay details to your computer.

Change the WiFi Channel

Usually, Wifi routers transmit their signals on a radio frequency of 2.4 GHz. Many other home things might operate on or around the same frequency, like cordless phones, for example. So, the channel ends up being slowed down gradually with lots of excess traffic that decreases your wireless connection. In the U.S., routers have a predefined set of 11 channels, and the default on a great deal of them is channel 6. Altering the channel would reduce some interference. So how do you alter the channel?

Tips For Selecting The very best Wireless Router For Your House Wi-Fi

We are going to build a list of Best Wireless Router 2017 and until beginning, our team decided to explain some key points which will help our customers to make an option. After reviewing these points you will comprehensively pick among the best amongst the very best Wireless Router 2017. Yes, these points would be seen multiple times in this 2017 list. For this purpose, we are going to describe these milestones.

MU-MIMO:

MU-MIMO stands for Multi-User Multi-Input Multi-Output and this would be pointed out again and again in our Wireless Router 2017 list. This technology is self-explaining by its name. MU-MIMO is built to provide high-speed web, quick file uploading and moving information and offering high-bandwidth of wifi signals amongst all the linked devices concurrently.

Beamforming Technology:

While reading about 2017 wireless routers you will see this technology as place as it has to be mentioned. What is this? Here is one line answer, “Beamforming innovation limits signals to the connected device rather than splitting in all directions”. In this way, connected devices will satisfy seamless and lag-free video streaming, online video gaming without lagging and VoIP calls without diversion.

Adult Control:

Adult Control function is another essential element which would be otherwise seen in our Wireless Router 2017 list. Through this feature, we can block a website to open for other connected devices.

Quality of Service (QoS):.

QoS method prioritizes bandwidth according to need. You can define by hand which gadget must meet how much speed. And of course, this would, definitely, be considered 10s of times in the list.

Central Processing Unit/Processor (CPU):.

Processing speed richly counts because through Processor factor to consider one can approximate that how fastly a wireless router procedure lots of devices connected to it. Let me offer you the example of LINKSYS WRT1900 ACS Dual-Band Wifi Router has 1.6 GHz processor.

Now above pointed out features are some essential standards. Keep these characteristics in mind and check out the following list of Best Wireless Router 2017. Another thing this is a random list, not an ordered one and if you want to buy under 100 dollars cordless route.

Router Tips to Make Your Wireless Faster

The router is the technological workhorse of the modern-day home, bringing Web to your many devices. A router’s cordless speed is typically a user’s main issue: Unlike wired networks, cordless networks appear to suffer disturbance from objects in our daily lives– should the router be above the dryer, or listed below; next to the microwave, or above? Wireless speeds can also be affected by a lot of devices sharing the same access point too. Your gadget is fighting for restricted bandwidth.

Many basic ways to enhance your Wi-Fi network are available, such as putting the router in the center of the area you want it to cover, keeping the router far from metal things that might obstruct the signal, or ensuring there aren’t too many other radio-enabled gadgets transmitting on a 2.4 GHz signal (requirement for many older routers). However other ways to enhance your signal may be a little less evident. Here are some of those tricks (do not hesitate to include your very own workarounds in the remarks below).
Check Your Speed

Although the majority of people can evaluate if their home wireless is too slow or not, inspecting the speed of the connection will let you understand for sure whether you’re within range of the speed guaranteed by your supplier. Downloading a light-weight piece of software like LAN Speed Test provides you submit and download speed numbers in megabits per 2nd (mbps), which you can check against your ISP’s promised speed to see if your network is in fact sluggish or if you just need to pay for faster service. You’ll probably have to run the test several times and at different times of the day to obtain a genuine sense of how fast your Wi-Fi is overall, as crowding on the 2.4 GHz spectrum could trigger slowdown during the busiest times of the day for Internet traffic.

Modification the Channel

If your wireless is weaker than it needs to be, you can try by hand changing the broadcast channel to discover one with fewer wireless routers competing for space. If your router is fairly new and immediately chooses which channel to relay from, then you will not get too much use from pinning your wireless down to a single channel, but for older routers it’s worth checking out.

First you’ll want to enter into the router’s graphical user interface (GUI), by typing the router/gateway address into the address bar in a browser window while your computer is connected to the router’s wired or wireless network. You can generally find the router’s address on the router itself, in the user’s manual, or online if all else fails. For instance, if you have a D-Link router, you’ll type http://192.168.0.1; if you have a Linksys, you ‘d type http://192.168.1.1. The web browser will trigger you to enter your user name and password.

The specific navigation through the GUI for each router is different, but once you find the router’s wireless choices (normally under headings like “LAN” or “Network”), you ought to see a “wireless channel” alternative. In North America, you can transmit from channels 1, 6, and 11. Try switching to one of those 3 channels that’s not presently in use and see if it speeds traits up.

Include Some Hardware
Altering the actual hardware that makes the cordless signal waft through your house is a simple way to strengthen a wireless signal throughout a larger area. While many routers include omnidirectional antennae (significance they transmit signal in all instructions), you can likewise buy a single-directional antenna that should double the strength of your signal, but only in one direction. This is fantastic if you should position your router by a wall, and you do not wish to squander resources transmitting half of the wireless signal through the wall or window. Single-directional antennae can cost anywhere from $20 to $120.

Wireless repeaters do a similar trait, basically just repeating the signal put out by your router and assisting you cover more area with Wi-Fi. These likewise cost around $20 for a low-end repeater, but if you’re up for a little Do It Yourself you can make your very own wireless repeater for free by submitting custom-made firmware from DD-WRT to an old router (detailed guidelines here, and an explanation of DD-WRT listed below).

Another hardware-related modification: if you have several rooms you have to cover with your signal, think about purchasing a hybrid Homeplug/ wireless router gadget. Homeplug technology utilizes the AV line in your home to send broadband signals to other rooms, and if you consist of a cordless router on the adapter, you’ll have a Wi-Fi signal right there in the room with you.

Check Who’s on Your Network

You never wish to leave your wireless signal without at least some sort of defense, and it’s worth keeping in mind that there are various levels of security on every router. Once again, you’ll wish to go to your router’s GUI and examine its cordless security settings. Typically, there will be a drop-down or click-to-select menu to enable different levels of security. WEP is the weakest form, and is quickly broken; WPA is much more safe and secure; and while WPA2 is the most protected, it can sometimes be incompatible with older devices on your network, so WPA is most likely the very best bet if you’re not sure exactly what you want.

Again, somewhere in your router’s configuration (under “wireless” or “status”) there ought to be a list of devices that link to your system. Remember that this list of devices will likewise consist of the laptops and smartphones of any guests who utilized your Wi-Fi recently, or any cameras, printers, or other Wi-Fi allowed devices that you might use around your home. If you’re not sure, you can match the Media Gain access to Control (MAC) addresses noted on the router GUI with the MAC addresses of your different gadgets.

If you do discover trespassers, you could alter your cordless password, or some routers will enable you limit the number of gadgets that can connect to your network. Obviously, there are programs out there that will permit you to triangulate the place of the moochers based on network signals. While the legality (and peace of mind) of attempting to locate individuals who are utilizing your Web is doubtful (and not sanctioned by PCWorld) there would probably be nothing wrong with knocking on your downstairs next-door neighbor’s door and politely asking them personally to get off your Wi-Fi. There is, naturally, the well-known “Upside-Down-ternet” gag, where you turn the Wi-Fi burglar’s browser pages upside down, or make their browser pages blurred, or change them with kittens! While it sounds enjoyable, it’s a pretty sophisticated trick, so the average user might wish to change to WPA security and password-protect the network rather.

Adult Website Obstructing With Open DNS
OpenDNS can block phishing attacks and adult websites.
Numerous new routers come with parental control alternatives constructed into the device’s features. If you have an old router, nevertheless, you can utilize a service like OpenDNS. When your browser gets the command to obtain a URL, it must go through a DNS server, which will search for the site’s numerical IP address. OpenDNS uses it’s own DNS lookup technology to resolve your web browser’s page, implying it can frequently raise a web page faster. But among the huge benefits for parents is that it also can obstruct phishing attacks and adult sites that may get your kids in trouble.

OpenDNS does not even require that you subscribe with them (the free variation is ad-supported). Merely go to your router’s GUI and change from an auto-generated IP address to a fixed IP address; then in the fields for DNS (there are normally 2 to 4 areas for you to add a DNS lookup number), go into OpenDNS’s look-up numbers, which you can find on the OpenDNS site. Doing this from the router, instead of just configuring OpenDNS on a specific computer system, will secure all the computers connected to that router.

Configuring wireless router with Zeenext

Configuring wireless router with Zeenext
found little resources in net to configure wireless routers for working with Zeenext connections. Recently, I set that up and here is the configuration information, in case, you want to set it up yourself.
I have a RJ45 cable coming into my house from zeenext and once I connect that to ethernet port of my laptop, I am connected to internet with an always-on connection. There is no modem involved in the whole setup.
Before you start:
Configuring wireless router with Zeenext 1. Connect to internet typically with your desktop/laptop using Zeenext cable and do the following in a command prompt window
ipconfig/ all.
Note down.
a. Connection specific DNS suffix.
b. IP address.
c. Default Gateway IP.
d. DNS Servers IP.
Configuring wireless router with Zeenext.
2. Now, disconnect the zeenext cable from your computer and connect that to WAN port of your router. Get another cable (typically supplied with router) and connect one of the LAN ports of the router to the ethernet port of the computer.

3. Open the router configuration page of the router (refer to the manual of the router to do that, typically site does that) in Internet Explorer and note down the MAC address of the internet port of the router. This is typically found in the ‘router status’ of the router configuration.

4. Contact Zeenext and ask them to register the new MAC address (as discovered in step 3 above). This will take around 10 mins to be activated.
Configuring wireless router with Zeenext 5. In the router configuration, enter the following.
Basic settings:
a. Internet Connection require a login: No.
b. Do not put anything in Account Name and put what you found in step 1a in domain name.
c. Use static IP address and enter the following.
i. IP address same as what you found in step 1b.
ii. IP Subnet mask as 255.255.255.0.
iii. gateway IP address same as what you found in step 1c.
iv. Primary/secondary DNS is what you found in step 1d. Only of them is enough.
d. Keep mac address as default.
Make sure to save/apply after all these changes.

Wireless settings:
Follow the router manufacturer’s suggestion. Again save/apply if you changed something here.

You can leave everything else as default and change them later when you are more familiar with your router.

Your internet explorer should now open any page that you ask it to. Make sure that ‘automatically detect settings’ is turned on in IE (Tools-> Internet options-> connections-> LAN settings).
Note: For all the configuration related parameters that I have mentioned in this post hold good for Netegear routers. It may be little different for other makes.found little resources in net to configure wireless routers for working with Zeenext connections. Recently, I set that up and here is the configuration information, in case, you want to set it up yourself.
I have a RJ45 cable coming into my house from zeenext and once I connect that to ethernet port of my laptop, I am connected to internet with an always-on connection. There is no modem involved in the whole setup.
Before you start:
1. Connect to internet normally with your desktop/laptop using Zeenext cable and do the following in a command prompt window.
ipconfig/ all.
Note down.
a. Connection specific DNS suffix.
b. IP address.
c. Default Gateway IP.
d. DNS Servers IP.

2. Now, disconnect the zeenext cable from your computer and connect that to WAN port of your router. Get another cable (usually supplied with router) and connect one of the LAN ports of the router to the ethernet port of the computer.

3. Open the router configuration page of the router (refer to the manual of the router to do that, usually website does that) in Internet Explorer and note down the MAC address of the internet port of the router. This is usually found in the ‘router status’ of the router configuration.

4. Call up Zeenext and ask them to register the new MAC address (as discovered in step 3 above). This will take around 10 mins to be activated.

5. In the router configuration, enter the following
Basic settings:
a. Internet Connection require a login: No.

b. Do not put anything in Account Name and put what you found in step 1a in domain name.
c. Use static IP address and enter the following.
i. IP address same as what you found in step 1b.
ii. IP Subnet mask as 255.255.255.0.
iii. gateway IP address same as what you found in step 1c.
iv. Primary/secondary DNS is what you found in step 1d. Only of them is enough.
d. Keep mac address as default.
Make sure to save/apply after all these changes.

Wireless settings:
Follow the router manufacturer’s suggestion. Again save/apply if you changed something here.

You can leave everything else as default and change them later when you are more familiar with your router.

Your internet explorer should now open any page that you ask it to. Make sure that ‘automatically detect settings’ is turned on in IE (Tools-> Internet options-> connections-> LAN settings).
Note: For all the configuration related parameters that I have mentioned in this post hold good for Netegear routers. It may be little different for other makes.
Get another cable (usually supplied with router) and connect one of the LAN ports of the router to the ethernet port of the computer.

Open the router configuration page of the router (refer to the manual of the router to do that, usually website does that) in Internet Explorer and note down the MAC address of the internet port of the router. It may be little different for other makes.found little resources in net to configure wireless routers for working with Zeenext connections. Get another cable (usually supplied with router) and connect one of the LAN ports of the router to the ethernet port of the computer.

Open the router configuration page of the router (refer to the manual of the router to do that, usually website does that) in Internet Explorer and note down the MAC address of the internet port of the router.

Easy Setup With The Best Linksys Wireless Router

A Linksys cordless router permits the computer systems in your house to access the web wirelessly. Depending upon the kind of cordless path you go, you could or could not need to link the major computer system by means of Ethernet cord to the router and afterwards connect all other computer systems wireless. They do have entirely cordless routers, however I wished to see to it you understand there are various kinds and methods to make a connection.

This suggests that you can go onto your desktop computer system and get hold of a file that you now require on your laptop computer, and so on. Being wireless does not prevent us however assists us in methods we most likely never ever believed were possible.

If all routers look the very same to you, think me they are not. If you require aid in choosing discover that friendly computer system tech in the area and ask their suggestions. They understand the ins and outs of the computer system world and can absolutely assist you stand up and running.

There will certainly be no have to fret about the setup due to the fact that all Linksys routers will certainly have detailed guidelines. Naturally various makers will certainly have various setups for the router. Look at your guidelines and if you run into any issues you can constantly call the technical support number which need to be provided on the guidelines or box.

You wish to see to it you position your router in a main area to all the computer systems in the house. You desire them all to obtain a clear, unblocked signal to be able to access the web with no issues.

In this day and age it appears like a lot of our lives solve around electronic devices in one method or another. On our computer systems. You do not desire any individual on the outdoors getting into your network.

In looking for to end up being cordless a Linksys cordless router can assist you. If you seem like standing up from that desk and sitting in front of the TELEVISION on the couch and browsing online while seeing your preferred program, you can do this. Invite to the world of cordless computing.

A Linksys cordless router permits the computer systems in your house to access the web wirelessly. Depending on the type of cordless path you go, you could or could not have to link the major computer system by means of Ethernet cord to the router and then connect all other computer systems wireless. They do have entirely cordless routers, however I desired to make sure you understand there are various kinds and methods to make a connection.

How Your Home Wireless Router Works

A Wireless Router Connects Computers To The Internet Without Wires

Here is some information relating to the humble wireless router. This information will give you the introductory information you need when you want to transform your computer internet connections into a wireless system.

Although wireless routers are commonplace in most homes now, not everybody has them, and finding the right information that you need to install and get them running can be difficult at times.

A Modem Connects Your Home To The Internet

Typically a standard modem will allow you to connect one computer to the internet at a time. This means that there will be a cable going from the back of your computer into your modem and then the modem will connect to the World Wide Web via the account your have with your Internet Service Provider and this may be via your TV Cable company cables or the local phone company using a broadband DSL connection on your phone line.

This way the modem can send the information (in “packets” of data) to the internet and then bring back relevant information to your computer.

A Router Connects Multiple Computers To The Internet

When you use a router, your router can then connect more than one computer in your home to the internet at the same time. This means that your router will connect to the internet in exactly the same way, but it will have more than one available connection slot where you can plug multiple computers into it.

This is great if you have more than one computer at home or even in an office. It is very simple and easy to do.

With a router, the signal is routed backwards and forwards between the computers and the internet.

A Wireless Router Does Away With The Need For Wires!

These routers can be connected through wires as mentioned above, or wirelessly, so that your computer can still communicate with the router, but send the data through the air so that there are no messy wires to deal with, restricting you from where the computers are.

Home wireless routers are particularly useful if you have a laptop or two, and wish to move around but still access the internet as well as access other files on the network.

The Are Many Good Brands Of Wireless Router Available

Major brands of wireless router include the like of Linksys and Belkin, D-Link and Netgear, Apple and Asus. They all have their benefits and downsides, simply purchase the one which makes the most sense to you, but also check for the latest speed specifications as well. All wifi routers will typically have an antenna which can be moved around for the best signal.

The data from the internet will travel through the antenna, broadcast through the air and then be received by the wireless adapter device, which will be contained inside your computer or laptop.

It is important to remember that any other wireless adapter within the broadcast range will also (technically) be able to receive the same information you are receiving, although modern encryption ensures that this does not happen these days.

Choosing a good wireless router for your home internet connections makes a lot of sense, so why not get yourself one for your home or office right now?