Add a wireless repeater

Wireless repeaters extend your cordless network range without requiring you to include any electrical wiring. Simply place the wireless repeater midway in between your cordless router 2017, modem router, or access point and your computer system, and you can get an immediate increase to your wireless signal strength.

Change your wireless channel

Wireless routers can transmit on a number of different channels, much like the way radio stations utilize various channels. In the United States and Canada, these channels are 1, 6, and 11. Simply as you’ll sometimes hear disturbance on one radio station while another is completely clear, sometimes one cordless channel is clearer than others. Attempt changing your wireless router’s channel through your router’s configuration page to see if your signal strength enhances. You do not need to change your computer’s setup, due to the fact that it can instantly spot the new channel.

Minimize cordless interference

The most typical wireless innovation, 802.11 g (wireless-G), operates at a frequency of 2.4 gigahertz (GHz). Lots of cordless phones, microwave, child screens, garage door openers, and other cordless electronic devices likewise use this frequency. If you use these wireless gadgets in your house, your computer may not be able to “hear” your router over the sound originating from them.

If your network uses wireless-G, you can peaceful the noise by avoiding wireless electronic devices that utilize the 2.4 GHz frequency. Rather, try to find cordless phones and other gadgets that utilize the 5.8 GHz or 900 megahertz (MHz) frequencies. Since 802.11 n (wireless-N) runs at both 2.4 GHz and the less regularly utilized 5.0 GHz frequency, you might experience less disturbance on your network if you use this technology.

Update your firmware or your network adapter driver

Router producers routinely make complimentary enhancements to their routers. Sometimes, these improvements increase performance. To obtain the latest firmware updates for your Cisco router, see Cisco.com.

Similarly, network adapter suppliers sometimes upgrade the software that Windows utilizes to communicate with your network adapter, known as the driver. These updates typically enhance efficiency and dependability.

Select devices from a single vendor

Although a Cisco router will deal with a D-Link network adapter, you often get better performance if you choose a router and network adapter from the very same supplier. Some vendors provide an efficiency increase of approximately two times the performance when you select their hardware (like their USB cordless network adapters).

If speeding up your connection is important to you, think about the next tip– updating your wireless technology.

Update 802.11 a, 802.11 b, and 802.11 g devices to 802.11 n.

Although wireless-G (802.11 g) may be the most typical type of wireless network, wireless-N (802.11 n) is at least twice as fast and it has much better variety and stability. Wireless-N is backward-compatible with 802.11 a, 802.11 b, and 802.11 g, so you can still utilize any existing cordless equipment that you have– though you will not see much enhancement in performance up until you upgrade your computer or network adapter to wireless-G, too.

If you’re using wireless-B or wireless-G and you’re dissatisfied with your network’s speed and performance, think about changing your router and network adapters with wireless-N equipment. If you’re purchasing brand-new equipment, definitely select wireless-N. Cisco Wireless-N routers, for instance, are effective, safe and secure, and basic to establish.

What Is A Wireless Router?

So what is a Wireless Router and what is it used for? Basically it is a small electronic device that performs two different, yet closely related, functions in a computer network, which is used to connect different computers together or to the Internet, usually in the home.

[1] It acts as Router to connect two or more computer networks to enable the interchange or transfer of data between them.

[2] It also acts as a Wireless Access Point, which allows wireless communication devices to connect to a computer network using Wi-Fi or Bluetooth and other similar standards.

Most often wireless routers used to enable access to either the Internet and the world wide web or to a local area computer network, but it does this (and this is the important bit!) without the need for any cables to form the connections.

In other words it allows these connections to be done without wires!

The most obvious and probably most popular use is to connect laptop and notebook computers at home to the internet from any room in the house without having to use cables. And these days almost every household with a broadband internet connection will use a wireless router to enable one or more computers in the house to connect to the Internet.

This are often referred to as a wifi system and connections to it from a computer require that the computer has a hardware device called a wireless network adapter installed to transmit and receive signals and data to and from the wireless router, which acts as the local interface to the Internet and everything else online.

A Wireless Router can function as part of a wired LAN, or local area network, or as part of a “wireless-only” LAN, and even in a mixed system of a combined wired and wireless network configuration.

Today most of the current wireless routers on the market will have some of the features below:

  • Some local area network Ethernet LAN ports for connection to personal computers by Ethernet cable.
  • A wide area network or WAN port used to connect to a larger network that has Internet access.
  • A wireless antennae which allows many connections from several other wireless devices in the home or office, such as wireless network adpater cards in laptop and notebook computers.

Most consumer purchased wireless routers are intended for home use and this is clearly where the biggest market is. This however can cause problems as the signal strength from the router may not be strong to penetrate through all the walls of the building to the rooms on the extremeties especially upstairs.

Some may have the opposite problem that the signal actually goes beyond the 4 walls of the house and interferes with the signal of another wireless router that a neighbor may have in their home. Also interference from other wireless systems, such as home CCTV monitoring and similar external security systems.

So when you go to buy make sure you understand the terminology and all the different things that can happen when you install a wireless router in your home!

How Your Home Wireless Router Works

A Wireless Router Connects Computers To The Internet Without Wires

Here is some information relating to the humble wireless router. This information will give you the introductory information you need when you want to transform your computer internet connections into a wireless system.

Although wireless routers are commonplace in most homes now, not everybody has them, and finding the right information that you need to install and get them running can be difficult at times.

A Modem Connects Your Home To The Internet

Typically a standard modem will allow you to connect one computer to the internet at a time. This means that there will be a cable going from the back of your computer into your modem and then the modem will connect to the World Wide Web via the account your have with your Internet Service Provider and this may be via your TV Cable company cables or the local phone company using a broadband DSL connection on your phone line.

This way the modem can send the information (in “packets” of data) to the internet and then bring back relevant information to your computer.

A Router Connects Multiple Computers To The Internet

When you use a router, your router can then connect more than one computer in your home to the internet at the same time. This means that your router will connect to the internet in exactly the same way, but it will have more than one available connection slot where you can plug multiple computers into it.

This is great if you have more than one computer at home or even in an office. It is very simple and easy to do.

With a router, the signal is routed backwards and forwards between the computers and the internet.

A Wireless Router Does Away With The Need For Wires!

These routers can be connected through wires as mentioned above, or wirelessly, so that your computer can still communicate with the router, but send the data through the air so that there are no messy wires to deal with, restricting you from where the computers are.

Home wireless routers are particularly useful if you have a laptop or two, and wish to move around but still access the internet as well as access other files on the network.

The Are Many Good Brands Of Wireless Router Available

Major brands of wireless router include the like of Linksys and Belkin, D-Link and Netgear, Apple and Asus. They all have their benefits and downsides, simply purchase the one which makes the most sense to you, but also check for the latest speed specifications as well. All wifi routers will typically have an antenna which can be moved around for the best signal.

The data from the internet will travel through the antenna, broadcast through the air and then be received by the wireless adapter device, which will be contained inside your computer or laptop.

It is important to remember that any other wireless adapter within the broadcast range will also (technically) be able to receive the same information you are receiving, although modern encryption ensures that this does not happen these days.

Choosing a good wireless router for your home internet connections makes a lot of sense, so why not get yourself one for your home or office right now?